Asian Paints Berger, Tuff AR Primer, Superior Spread Rate and Alkali-Resistant, 23Kg - White

Features

• Alkaline-resistance
• Powered by nanotechnology
• A higher spread rate

Application Recommendations:

• Use on both the inside and outside
• Concrete, plaster, masonry, brickwork, and blockwork are examples of substrates.

Surface preparation:

The level of surface preparation has a direct impact on how well this coating performs.
• Make sure the surface is free of any pollutants, dry, and clean.
• The surface must be solid and laitance-free.
• Use a wire brush or a sweeping blast to remove laitance.

Application Details:
The level of surface preparation has a direct impact on how well this coating performs.
• Make sure there is enough airflow while drying and applying.
• If condensation is probable and humidity is more than 85%, avoid applying.
• The surface should be 3°C or more above the dew point.
• Add sweet water to the substance to thin it out by 30 to 50% by volume.
• Usage a broad, flat stirrer and vigorously lift the stirrer upwards to completely swirl the contents both before and during use.
• Using a brush or roller, apply a uniform layer being careful to prevent runs and sags. Two coats at least are advised.
• Conventional Spray: Make use of standard spraying tools.

Additional Data:
• There are three different application methods: brush, roller, and spray.
• Sweet water can be used as a thinner.
• Depending on the application technique, use a thinning ratio of 30 to 35% to make it easier to apply.