Jotun 18L Acrylic Emulsion Primer, Excellent Substrate Penetration
Features
The best adherence is consequently provided by excellent substrate penetration.
It provides the finest defence against an alkali attack. fungal and algae resistant.
Optimally used: primes exterior surfaces well. also suitable for priming interior surfaces.
Substrate: Surfaces made of rendered surfaces, concrete, blockwork, cement plaster, etc.
Surface cleaning: The substrate needs to be sturdy, spotless, dry, and devoid of debris, oil, grease, lacquer, etc.
Form release agents and curing agents must be completely eliminated. Before application, a little sanding with the appropriate abrasive material is advised.
Any resulting dust or loose debris must be taken out.
CONDITIONS DURING APPLICATION :
The substrate's temperature must be at least 10 °C and at least 3 °C above the air's dew point, as measured close to the substrate. To guarantee adequate drying in small spaces, good airflow is typically needed.
DRYING TIMES:
Drying times are typically influenced by factors like air flow, temperature, film thickness, and number of coats.
1. The advice given is to recoat with the same type of general paint.
2. If more than one coat is applied, the number, order, and total thickness of the prior applications applied will all affect drying timeframes.
3. Before applying the next layer, the surface needs to be clean, dry, and free of contaminants.
Guiding Data for Airless Spray
Nozzle tip: 0.0210.027"
Spray angle degrees: 6580°
Pressure at nozzle: 140 - 190 kg/cm² (2100 psi)
