Jotun Road Marking, Blue - 20L
Features
Can be applied to mark kerbs and roads. Easy to use. Its colours are UV resistant.
RECOMMENDED USE:
Suitable for use as kerbstones, speed bumps, or other low-traffic areas on asphalt and concrete roads.
SUBSTRATE: Roads and kerbs.
PRODUCT DATA:
Packaging size: 20 L.
Colours: Blue.
Solids by volume 37 ± 2 volume%.
Specific gravity: 1.2.
VOC: 584 g/l.
APPLICATION DATA:
The product can be applied by
Roller: Recommended.
Spray: Use airless spray or conventional spray.
Brush: Recommended to paint corners and edges.
Guiding data for airless
spray Nozzle tip 0.0180.021"
Spray angle degrees 6580°
Pressure at nozzle 15 MPa (150 kg/cm²)
Cleaning of painting tools: Jotun Thinner No. 7.
Film thickness per coat
Typical recommended range
Dry film thickness 40 - 80 µm
Wet film thickness 110 - 210 µm
Theoretical spreading rate 9.25 - 4.5 m²/l
Thinner: Jotun Thinner No. 7.
Dilution: Maximum 10 %.
CONDITIONS DURING APPLICATION:
The substrate's temperature must be at least 10 °C and at least 3 °C above the air's dew point, as measured close to the substrate. To guarantee adequate drying in small spaces, good airflow is typically needed. No more than 4% of the substrate's moisture should be present (by weight). Once the coating is entirely dried, it should not be subjected to mechanical stress, oil, or chemicals.
DRYING TIMES:
1. The advice offered is to repaint using the same general sort of paint.
2. When applying multiple coats, drying durations will be impacted by the quantity and order of coats applied, as well as by the total thickness of those coats.
3. Before the next coat is applied, the surface needs to be clean, dry, and free of contaminants.
The drying time is calculated by stated values:
Substrate temperature 10 °C 23 °C 40 °C
Surface (touch) dry 20 min 10 min 7 min.
Hard dry 60 min 30 min 15 min
Dry to over coat, minimum 120 min 60 min 30 min
RECOMMENDED PAINT SYSTEM:
Road Marking Paint: 2 Coat.
STORAGE:
The ROAD MARKING BLACK 20LTR JOTUN must be stored as per National regulations. Make sure the containers are kept dry, refrigerated, and well-ventilated while being stored, and keep them away from heating systems. Containers must be kept closed at all times. Handle with care.
