Sodamco Weberep 360FFR 20KG

Features

• The substrate should be sound, clean free from any dust or demoulding products and oils.
• The surface should be moistened in hot weather.
• The surface should not be overheated or frozen.
• The paste should be mixed vigorously until fully homogeneous.
• Clean tools with water immediately after use.
• If the application temperature is higher than 35°C, make sure to use cool water to keep the mixed mortar temperature below 30°C.
• Weber rep360 FFR should be cured with clean water for at least three days by spraying twice a day.
• Smooth finish attainable.
• Applicable over large areas.
• Available in white and light grey.
PREPARATION OF SUBSTRATE
• The substrate should be sound, clean free from any dust or demoulding products and oils.
• Roughen the surface to remove any laitance. The surface should be moistened in hot weather.
• It should not be overheated or frozen.
PRODUCT PREPARATION
• The ¬ep 360 FFR paste is obtained by mixing a 20 kg bag with 5.4 to 7 litres of clean cool water, using a suitable mixer.
• The paste should be mixed vigorously until fully homogeneous. Clean tools with water immediately after use.
• Ideal application temperature is between + 5ºC and + 35ºC. If the application temperature is higher than 35 ºC, make sure to use cool water to keep the mixed mortar temperature below 30 ºC.