Meind Modified Sine Wave Power Inverter 2000W DC 12V to AC 220V
Meind 2000 2000 Watt Inverter Modified Sine Wave is very cost-effective. It can transfer input DC form battery to AC output, for your electric devices and home appliances when been outside or power failure. It can offer sufficient continuous 2000W output, and peak 4000w.
It has so much power that it can work with most loads. 2000W Modified Sine Wave Power Inverter can be used in the off-grid solar system too. It could be a great helper for enjoying your life!
You can also buy 2000W Modified Sine Wave Power Inverter on our B2B & B2C online store And you are very welcome to review feedback of our power inverter from worldwide on it.
6 protections of Meind 2000 Watt Inverter:
1. Over Load Protection: When the connected load exceeds the power inverter rated power watts (W), the inverter will automatically shut down to stop the output.
2. Over Heat Protection: As the internal temperature of the power inverter or the ambient temperature is too high, the inverter output will automatically stop to ensure the safety of electrical equipment.
3. High-Voltage Protection: When the DC input voltage exceeds the normal range of the power inverter will automatically shut down to stop the output voltage is a too high note when there may be damage to the machine.
4. Low-Voltage Protection: When the battery or power supply voltage is too low, the power inverter will stop output automatic shutdown protection to protect the battery or power supply is not compromised.
5. Reverse Protection: When the car inverter link reverses to the battery, inverter fuse will be blown, without damaging the product itself, you need to replace the fuse.
6. Short Circuit Protection: When the load is connected severe short-circuit fault, the inverter will automatically shut down to stop the output.
| Model No. | M2000CD | ||
| OUTPUT | AC Voltage | 110V or 220V AC ±8% | |
| Continuous Output Power | 2000 W | ||
| Peak Output Power | 4000 W | ||
| Waveform | Modified Sine Wave | ||
| Frequency | 50 Hz or 60 Hz ±4 | ||
| LED Indicator | Charging status, output status and fault status | ||
| INPUT | NO LOAD Current Draw | ≦0.4A | |
| DC Voltage | 12V or 24V DC | ||
| Voltage Range | 10-14.8V or 18-28V DC | ||
| Efficiency | 90% | ||
| Fuse | 40A x 6 | ||
| Low Voltage Alarm | 10 ± 0.4V or 19 ± 0.4V | ||
| Charging | Input: AC 110V-240V Output: DC 13.8V/DC 27.6V AMP: 8A-10A The Inverter will alarm and cut off when the battery is full of power |
||
| PROTECTION | Over Load | 2200 W (Shut off output Voltage, re-power on to recover) | |
| High Voltage Shutdown | 14.8 V or 28.2 V DC | ||
| Low Voltage Shutdown | 9.6 V or 18.6V DC | ||
| Over Temperature | When Shut off output Voltage, recovers automatically after temperature goes down | ||
| Output Short Circuit | Shut off output Voltage, re-power on to recover | ||
| Battery Polarity Reverse | By fuse open | ||
| ENVIRONMENT | Working Temperature | 0-60 Degree Centigrade | |
| Working Humidity | 20%-90% RH | ||
| PACKING | Material | Gift Box | |
| Dimensions | 350*190*71 MM | ||
| N.W / G.W | 3.7 KG / 4.5 KG | ||
| Carton Packing | 6 PCS / Carton | ||
| Carton Weight / Dimensions | 27 KG / 54*39*55.5 CM | ||
| OTHERS | Cooling | Thermostatically controlled cooling fan | |
| Application | Home and Office appliances, Power tools and Portable equipments, Vehicle, Yacht and Solar power systems …etc. |
Note : Actual Product Model / Design May Varies
